Nikon N65 - Page 107

••••••••••••••••••••••
Autofocus
TIL phase detection, Nikon Multi-CAM900 autofocus module with
AF -Assist Illuminator (approx. 0.5m-3m or 1.6-9.8 ft .)
• Detection range: EV -1 to EV 19 (ISO 100, at normal temperature)
Lens servo AF: Auto-Servo
AF: camera automatically chooses Single Servo AF or
Continuous Servo
AF operation according to the subject status, i.e.
stationary or moving (including directional information) .
• Single Servo
AF (focus is locked when the subject is in -foc us)
• Continuous Servo AF (camera continues to focus on a moving
subject) Focus Tracking with Lock-On
rr>1 automatically activated
by subject's status
M: Manual focus
Focus area One of five focus areas can be selected
Focus Area mode • Dynamic
AF Mode with Closest-Subject Priority
• Dynamic
AF Mode
• Single Area with M focus mode
Metering system
TIL full-aperture exposure metering system
Three metering systems selectable (limitations with lens used)
• 3D six-segment Matrix Metering: with
0- or G-type AF Nikkor
• Six-segment Matrix Metering: with
AF Nikkor other than 0- or G-
type (except
AF Nikkor for F3AF and IX-Nikkor), AI -P Nikkor
• Center-Weighted Metering: automatically selected with Manual
exposure mode
Metering range
3D Matrix Metering:
EV 1-20
Center-Weighted Metering:
EV 1-20
(at normal temperature, ISO 100, f/1.4 lens)
Exposure meter coupling CPU
Exposure Compensation ~osure compensated in ±2 EV range, in 1/2 steps (except in M or
Auto Exposure Bracketing range: ±2
EV ; number of ~ots: three; bracketing
Bracketing steps: 0.5, 1, 1.5 or 2
EV (except in or Vari -Program)
Film speed setting
• Automatically set
to ISO film speed of OX-coded film in use (manual
not selectable)
• Film speed range:
OX : ISO 25-5000, automatically set to ISO 100
with non-OX-coded film
107