Nikon N65 - Changing Battery Inside the Remote Control Unit

• Changing battery inside the remote control unit
NOTE: Storing batteries
While keeping the battery holder release
lever pressed as
the arrow on the remote
control unit indicates
to release the lock,
pull out the battery holder from the
remote control unit.
2 Remove the used battery.
3
Insert a new CR2025 3V lithium battery
with EB side facing up.
4
Insert the battery holder until it clicks
shut.
Keep batteries out of children's reach. If swallowed, contact a doctor
immediately. (For "Notes on Batteries", see page 98.)
72