What to do if underexposure occurs with Nikon Camera Accessories?
If underexposure occurs when using your Nikon Camera Accessories, rearrange the position of the camera or flash unit. The issue might be caused by light from the flash unit entering the camera lens or the light sensor window on the flash unit.
How to fix a Nikon Camera Accessories SB-R200 that does not fire?
If the SB-R200 does not fire, first, ensure the SB-R200’s power is on and the red ready-light is illuminated. If it still doesn't fire, check that the channel numbers and group names are the same on both the Commander (SU-800) and the SB-R200. Finally, ensure that the control signal from the Commander reaches the light sensor window of the SB-R200 by rearranging its position.
Why is AF-Assist Illuminator not turning on with Nikon Camera Accessories?
If the AF-Assist Illuminator on your Nikon Camera Accessories does not turn on, it could be because the SU-800 is set to close-up mode; in this mode, the illuminator won't activate. Alternatively, check if the camera’s focus mode is set to “AF-C”; if so, change it to “AF-S”.
How to prevent vignetting with Nikon Camera Accessories?
Vignetting with Nikon Camera Accessories can be caused by setting a shutter speed faster or slower than the flash sync speed; in this case, set the shutter speed to the flash sync speed. If you are using a wide angle lens, vignetting may also occur; try changing the lens’ focal length.
General| Compatibility | 2x SB-R200, AS-20, SJ-2, SW-C1, SW-11, SW-12, SU-800. |
|---|---|
| Product color | Black |
| Approx. number of flashes | 2 |
Important safety warnings for using the SU-800 Commander and SB-R200 Speedlight.
Critical safety instructions and warnings related to the use of lithium batteries.
Specific safety warning for the TTL Cord SC-30 accessory.
Overview of the key features and operational capabilities of the Speedlight system.
Advice and best practices for optimal use and care of the Speedlight.
Guidance on compatible cameras and lenses for use with the Speedlight system.
Detailed description of individual components and accessories of the Speedlight system.
Step-by-step guide for performing close-up flash photography with the R1C1 kit.
Step-by-step guide for using the Commander function with the R1C1 kit.
Instructions for correctly inserting batteries into the SB-R200 Speedlight unit.
Guide on how to attach the SB-R200 Speedlight to camera lenses.
Overview of the various flash operations the SU-800 Commander unit can perform.
Instructions on the basic setup and operation of the SU-800 Commander unit.
Instructions on the basic setup and operation of the SB-R200 remote Speedlight unit.
Explanation of the capabilities and types of close-up flash operations.
Detailed steps for setting up and executing close-up flash photography.
Explanation of how the Commander function works and its applications.
Detailed steps for setting up and executing Commander flash operations.
How to perform test flashes to check lighting and exposure settings.
Guide on activating and using the focus-assist illuminator function.
Explanation and setup for continuous, repeated flash firing.
Instructions on using colored filters to modify flash light color.
Guide for using the SW-11 adapter for curved flash lighting in close-ups.
How to use the SW-12 diffuser and SW-C1 clip for soft lighting.
Using the AS-20 stand for flexible positioning of the Speedlight.
Explanation of close-up flash operation using cords with non-CLS cameras.
Step-by-step guide for close-up flash operation with cords.
Description of different flash modes like TTL, Manual, and Auto Aperture.
List of lenses and their compatibility, including potential functional limitations.
Common problems, causes, and solutions for Speedlight malfunctions.
Technical details and performance data for the Speedlight Commander and Remote Speedlight.
To Next Page