126
7 Troubleshooting
If the Speedlight malfunctions or a warning indication appears on the
Speedlight’s LCD panel, use the following items to determine the cause of the
problem before taking your Speedlight to a Nikon service center for repair.
Warning indications in the Commander SU-800 and the
Remote Speedlight SB-R200
In the close-up mode
Using cords warning
With CLS-compatible cameras, if the SU-800 and the
SB-R200 are connected using cords, the “Err”
indicator appears, and the “Using cords” indicator
blinks.
Incompatible camera warning
The SU-800 cannot be used with COOLPIX 8400 and
COOLPIX 8800 digital cameras. If used, the Wireless
flash indicator blinks as a warning.
Incorrect connection to the SB-R200 using cords
With cameras not compatible with CLS, if the SU-800
and the SB-R200 are not correctly connected using
cords, the “Using cords” indicator blinks.
• If both groups A and B are not correctly connected, “Err”
indicator is displayed, and “Using cords” indicator blinks.
To Next Page
Loading...
