88
1 Test firing to confirm exposure
In dual-light close-up flash operation
When the [Test] button on the SU-800 is pressed, the SB-R200 in Group A fires in
one second, followed by the flash unit in Group B in two seconds at an M1/64
flash output level.
• Flash unit(s) in Group A or B of which flash firing is set to “canceled” also fire.
In triple-light close-up flash operation
When the [Test] button on the SU-800 is pressed, the SB-R200 in Group A fires in
one second, followed by the flash unit in Group B in two seconds, and the flash
unit in Group C in 3 seconds at an M1/64 flash output level.
• Flash units in Group A, B or C of which flash firing has been set to “canceled” also fire.
In Commander flash operation
When the [Test] button on the SU-800 is pressed, the remote flash unit(s) in
Group A fires in one second, followed by the flash unit(s) in Group B in two
seconds, and the flash unit(s) in Group C in 3 seconds.
• The SB-R200 fires at M1/64 flash output level regardless of the flash mode setting, and the
SB-800, SB-600 fires at an M1/16 flash output level.
• Flash units in Group A, B or C of which flash firing has been set to “canceled” also fire.
In repeating (RPT) flash operation
When the [Test] button on the SU-800 is pressed, the remote flash unit(s) in
Group A fires in one second, followed by the flash unit(s) in Group B in two
seconds, and the flash unit(s) in Group C in 3 seconds.
• The SB-800 or SB-600 fires at an M1/16 flash output level regardless of the flash mode
setting.
• Flash units in groups A, B and C of which flash firing has been set to “canceled” also fire.
ON/OFF
READY
LOCK
MODE
NO AF-ILL
SEL
A
B
To Next Page
Loading...
