58
3 Functions of the SU-800
The following functions can be set on the SU-800.
Switching functions between close-up and Commander
functions
Use the Commander/Close-up select switch to toggle between close-up and
Commander functions.
Settings in each flash mode
In close-up mode (p. 65)
• Flash mode (TTL, M)
• Group name (A, B, C)
• Flash firing/canceling for group A or B
• Flash output-level ratio between groups A and B
• Flash output-level compensation value (in TTL mode)
• Manual flash output level (in M mode)
• Channel number (1, 2, 3, 4)
In Commander mode (p. 79)
• Flash mode of remote flash unit(s) (TTL, AA, M, --- (flash canceled), RPT (Repeating) flash)
• Group name (A, B, C)
• Flash output-level compensation value (in TTL and AA modes)
• Manual flash output level (in M mode)
• Manual flash output level, the frequency, and the number of repeating flashes per frame
(in RPT mode)
• Channel number (1, 2, 3, 4)
Battery
chamber
Display in close-up mode Display in Commander mode
To Next Page
Loading...
