45
Flash operation
using the Nikon Close-up Speedlight Remote Kit R1
(Used with Nikon CLS-compatible cameras)
This section describes the necessary procedures for wireless
close-up flash operation with CLS-compatible cameras that
feature a Commander function and the Nikon Close-up
Speedlight Remote Kit R1.
• For details on close-up flash operation, see page 65.
1 Installing batteries in the SB-R200.
2 Attaching the SB-R200 to the front of the lens.
3 Turning on the camera and SB-R200.
4 Setting the Commander function on the camera.
5 Setting a channel number and group on the SB-R200.
6 Compose a picture and shoot with flash.
To Next Page
Loading...
