Nikon R1 - R1 C1 Kit Flash Operations; Close-up Flash Operation Procedures; Commander Flash Operation Procedures

27
Flash operation
using the Nikon Close-up Speedlight Commander
Kit R1C1
(Used with Nikon CLS-compatible cameras)
This section describes the necessary procedures for wireless
close-up and Commander flash operations with a CLS-
compatible camera when using the Nikon Close-up Speedlight
Commander Kit R1C1.
• For details on close-up flash operation, see page 65.
• For details on Commander flash operation, see page 79.
Procedures for close-up flash operation
1 Installing batteries in the SU-800.
2 Attaching the SU-800 to the camera.
3 Installing batteries in the SB-R200.
4 Attaching the SB-R200 to the front of the lens.
5 Turning on the camera, the SU-800 and SB-R200.
6 Setting the flash mode on the SU-800.
7 Setting a channel number on the SU-800 and SB-R200.
8 Setting a group on the SB-R200.
9 Compose a picture and shoot with flash.
Procedures for Commander flash operation
1 Setting Commander function on the SU-800.
2 Setting up the SB-R200.
3 Turning on the camera, the SU-800 and SB-R200.
4 Setting the flash mode on the SU-800.
5 Setting a channel and a group.
6 Compose a picture and shoot with flash.