68
2 Overview of close-up flash operation
What is close-up flash operation
The SU-800 can perform close-up flash operation to wirelessly control the
SB-R200 flash operation when mounted on CLS-compatible cameras.
Two types of close-up flash operations are available: (1) Dual-light close-up flash
operation (the SB-R200 units are divided into two groups (A, B)), and (2) triple-
light close-up flash operation (the SB-R200 units are divided into three groups
(A, B, C)).
Switching between “dual-light close-up flash operation”
and “triple-light close-up flash operation”.
Press and hold the [SEL](FUNC.) button for approx. 2 seconds to toggle
between “dual-light” and “triple-light” close-up flash operations.
Methods for setting up
Set up the SU-800 and SB-R200 in the same way as “Flash operation using the
Nikon Close-up Speedlight Commander Kit R1C1” (p. 28).
Items to be set
The following items can be set in the close-up flash operation.
• Flash mode (TTL, M)
• Group name (A, B, C)
• Flash firing/canceling for groups A and B
• Flash output level ratio between groups A and B (in TTL mode)
• Flash output level compensation (in TTL mode)
• Manual flash output level (in M mode)
• Channel number (1, 2, 3, 4)
Display in dual-light close-up
flash operation.
Display in triple-light close-up
flash operation.
To Next Page
Loading...
