Speedlight parts, their functions, and accessories
24
Attachment Ring SX-1
The SX-1 is used to secure the SB-R200 by
attaching it to the Adapter Ring on the front
of the lens.
The SB-R200 is detachable at any position
around the Attachment Ring. You can slide
the SB-R200 freely around the ring. There
are click stops every 15° on the Attachment
Ring.
Adapter Rings (SY-1-52, SY-1-62,
SY-1-67, SY-1-72, SY-1-77)
These rings can be attached to the front of
the lens for mounting the Attachment Ring
SX-1. Five Adapter Rings, with diameters of
ø52mm, ø62mm, ø67mm ø72mm and
ø77mm are provided.
Extreme Close-Up Positioning
Adapter SW-11
The SW-11 can be attached to the SB-R200
and used to curve flash light toward the
optical axis to create lighting effects when
taking close-up shots (p. 103).
Color Filter Holder SZ-1
The SZ-1 is used to attach a colored gel
filter (SJ-R200 or optional SJ-2) to the flash
head of the SB-R200 (p. 102).
Color Filter Set SJ-R200
(for SB-R200 package)
The set comprises a total of 4 filters: the
FL-G1 for fluorescent light, the TN-A1 for
incandescent/tungsten light, Blue and Red
(p. 100).
Speedlight Stand AS-20
The AS-20 can be used to freely position and
steady the SB-R200. The Attachment Ring
SX-1 can be attached to a tripod (p. 107).
IR Panel for Built-in Flash SG-3IR
The SG-3IR can be attached to a camera’s
hot shoe when a Nikon digital camera’s
built-in flash (such as D70-Series) is used
as a Commander (p. 50).
Flexible Arm Clip SW-C1
The SW-C1 can be used to hold a Diffuser. It
can also be attached to the mounting groove
on the Attachment Ring SX-1 (p. 105).
Diffuser SW-12
The SW-12 is a milky-white board that can
be used to diffuse flash light (p. 105).
Mounting groove
Mounting button
S
W
-
1
1
AS-20
Speedlight
mounting shoe
Tripod socket
Stopper
Mounting groove
S
W
-
1
2
To Next Page
Loading...
