Legal Information
Copyright © Nikon Metrology. All Rights Reserved.
This publication or parts thereof may not be reproduced in any form, by any method, for any
purpose.
Company names, logos and product names are registered trademarks or trademarks of their
respective owners. Nikon Metrology N.V. or any of its group companies make no claim to
third party trademarks.
The use of Nikon Metrology products, services and materials is subject to the Nikon
Metrology General Sales Terms and Conditions.
About this manual
This manual applies to a typical machine with the model type given on the front cover. Any
non-English manual is a translation of the ORIGINAL Instructions for the safe use of this
machine.
Nikon Metrology reserves the right to revise and improve its products as it sees fit. This
publication describes the state of this product at the time of publication, and may not reflect
the product at all times in the future.
Liability for calibration
Nikon Metrology will only accept liability for re-calibration if carried out in our own factory, and
for the verification process at the customer's site carried out by Nikon Metrology staff. We
also accept liability if the re-calibration or verification process is carried out by the customer if
these processes are explicitly agreed between the customer and Nikon Metrology. We will
not accept liability if the customer performs the re-calibration, or takes over responsibility for
the verification process from Nikon Metrology without prior authorisation, even if the
recommended Nikon Metrology process is followed.
Manufacturer's contact details
Nikon X-Tek Sy
stems Ltd,
Tring Business Centre, Icknield Way, Tring, Hertfordshire HP23 4JX. United Kingdom.
Tel. +44 1442 828700 Fax: +44 1442 828118
Website: http://www.nikonmetrology.com
Registered in England No. 01981536, VAT No. GB433 079 460
Sources of additional information
Contact support.xray.nm@nikon.com to:
• Get technical support (customers and distributors)
• Request quotations and order service parts
Current application software, drivers and manuals can be downloaded from:
https://shared.nikonmetrology.com/
Access for customers, resellers etc should be requested via Sharepoint access
Documentation feedback, suggestions for new or missing content or other comments can be
sent to: EngDoc.NM-Derby@nikon.com
To Next Page
Loading...
