XT V 160 X-ray System XTM0011-F2 vii
About this manual
This manual provides necessary information regarding safety, operation, maintenance and
troubleshooting for the X-ray system. Familiarising yourself with this information will help you
to get the most from the system.
This manual may contain additional information about system features
that are not applicable to your specific hardware configuration.
It is important to read ALL accompanying safety and installation
instructions to avoid damage to the product and potential injury to
yourself or others.
The manual is divided into the following sections:
• Important health and safety information - It is mandatory to read and understand this
section before operating the X-ray system.
• Safety systems - Details the safety systems of the machine.
• Warnings - It is mandatory to read and understand this section before operating the X-ray
system.
• Introduction to the X-ray system - Provides an overview of the system and its
components.
• Getting started - Provides information to enable you to quickly start inspecting samples
using the system.
• Maintenance - Covers the maintenance procedures which are required to ensure reliable
and safe operation.
• Troubleshooting - Provides procedures to identify and resolve simple system faults.
• Declaration of conformity - Provides the declaration of conformity for the named machine.
This manual covers the following model: XT V 160.
To Next Page
Loading...
