nilan CTS602 HMI - Maintenance and Inspection Procedures; Safety Valve and Anode Checks; Outdoor Unit and Heat Pump Care

Start-up settings
L
anguage
The unit is factory-set to Danish language. You can change the texts to other languages.
Language
↳
Danish Description: Select the desired language on the panel.
Date/Time
I
t is important to set date and time correctly. It makes it easier to localise errors indicated in an error
report. When logging data, it is important to be able to follow the history. The time is shown under
“Date / Time” in the display.
Date / Time
↳
Year Description: Select "Year" in the panel and then select the correct
year.
↳
Month Description: Select "Month" in the panel and then select the correct
month.
↳
Day Description: Select "Day" in the panel and then select the correct
day.
↳
Hour Description: Select "Hour" in the panel and then select the correct
hour.
↳
Minute Description: Select "Minute" in the panel and then select the correct
amount of minutes.
VPL28 (English)
BY NILAN
9