Nilfisk-ALTO ATTIX 30 User Manual

12
ATTIX 30-50 H/M
4.2 Switching on the
vacuum cleaner
4.2.1 Switch „ 0-I “
1)
Switch
position
Function
0
Off
auto
Auto On/Off
I
On / manual
mode
Switch
position
Function
0
Off
I
On
4.2.2 Switch „ auto-0-I “
1)
4 Control / Operation
4.1 Connections
4.1.1 Connecting the suction
hose
4.1.2 Electrical connection
The operating voltage shown on the
rating plate must corres pond to the
voltage of the mains power supply.
1. Ensure that the cleaner is
switched off.
2. Insert the power cord into a
properly installed and fused
socket with earthing contact.
Connect the suction hose.1.
auto
Hose
ø
Hose diameter
setting
ø27 ø27
ø32 ø32
ø36 ø36
ø38 ø38
Hose
ø
Hose diameter
setting
ø27 ø27
ø32 ø32
ø36 ø36
ø38 ø38
The hose diameter and the set-
ting for suction hose diameter
must be the same.
The hose diameter and the set-
ting for the suction hose diam-
eter must be the same.
1)
Optional accessories / Option depending on model

Nilfisk-ALTO ATTIX 30 Specifications

General

Category	Vacuum Cleaner
Tank Capacity	30 l
Airflow	3700 l/min
Vacuum Pressure	250 mbar
Hose Length	2.5 m
Dimensions	450 x 380 x 595 mm
Model	ATTIX 30
Mains connection	230 V, 50-60 Hz
Cable Length	7.5 m