Nilfisk-ALTO ATTIX 30 User Manual

24
ATTIX 30-50 H/M
7.2.8 Replacing filter element
(XtremeClean System)
Never use the vacuum clean er with-
out a filter.
Switch off the vacuum 1.
cleaner and pull the mains
plug out of the socket.
Open the retaining clamps 2.
(A) and remove the up-
per section of the vacuum
cleaner.
Removing the filter elements:
Open fi lter tension part (B).3.
Remove carefully the cas-4.
settes with fi lter elements.
Inserting the filter elements:
Insert new fi lter elements 5.
(C) into the cassettes (D).
Attach the cassettes with 6.
the fi lter elements onto the
upper section of the vacuum
cleaner.
Fix the fi lter tension part 7.
(B).
Dispose of the used fi l-8.
ter elements in accord-
ance with legal regulations.
Attach the upper section of 9.
the vacuum cleaner.
Close the retaining clamps 10.
(A). Ensure that the retain-
ing clamps fit properly.
A
A
A
A
B
B
C
D
B

Nilfisk-ALTO ATTIX 30 Specifications

General

Category	Vacuum Cleaner
Tank Capacity	30 l
Airflow	3700 l/min
Vacuum Pressure	250 mbar
Hose Length	2.5 m
Dimensions	450 x 380 x 595 mm
Model	ATTIX 30
Mains connection	230 V, 50-60 Hz
Cable Length	7.5 m