Nilfisk-ALTO ATTIX 30 User Manual

22
ATTIX 30-50 H/M
7.2.6 Replacing filter element
(H) (Xtreme Clean
System)
A
A
Switch off the vacuum clean-1.
er and pull the mains plug
out of the socket.
Open the retaining clamps 2.
(A) and remove the upper
section of the vacuum clean-
er.
Removing the filter elements:
Unscrew the screw and open 3.
fi lter tension part (B).
Remove carefully the cas-4.
settes with fi lter elements.
Replacing the filter element:
Place the protective filter 5.
bag over the filter element.
Carefully remove the filter 6.
element and close the pro-
tective filter bag with a knot.
Dispose of the used filter 7.
element in acordance with
legal regulations.
B
B
Inserting the filter elements:
Insert new fi lter elements (C) 8.
into the cassettes (D).
Attach the cassettes with the 9.
fi lter elements onto the up-
per section of the vacuum
cleaner.
Fix the fi lter tension part 10.
(B) and attach the screw.
B
C
D

Nilfisk-ALTO ATTIX 30 Specifications

General

Category	Vacuum Cleaner
Tank Capacity	30 l
Airflow	3700 l/min
Vacuum Pressure	250 mbar
Hose Length	2.5 m
Dimensions	450 x 380 x 595 mm
Model	ATTIX 30
Mains connection	230 V, 50-60 Hz
Cable Length	7.5 m