13
ATTIX 30-50 H/M
4.2.3 Suction power control
1)
Switch
position
Function
The suction
power control
switch allows
precise
adaptation of
the suction
power for
different
cleaning tasks.
4.2.4 Auto-On/Off-Operation
- "auto" switch
position
1)
The vacuum cleaner is switched on
and off by the power tool connected.
Dirt is picked up from the source of
dust immediately.
To comply with regulations, only ap-
proved dust producing tools should
be connected.
The maximum power consumption
of the connected electrical appli-
ance is stated in section "Technical
data".
Before switching the switch to posi-
tion „auto“, ensure that the tool con-
nected to the appliance socket is
switched off.
Switch off the vacuum clean-1.
er.
Switch off the power tool.2.
Connect the power tool and 3.
the vacuum cleaner with a
suction hose.
Insert the plug of the power 4.
tool into the tool socket on
the operating panel of the
vacuum cleaner.
Switch on the vacuum clean-5.
er. Switch in "auto" position.
Switch on the power tool. The 6.
vacuum cleaner motor starts
when the connected power
tool is switched on.
When the power tool is
switched off, the vacuum
cleaner continues to run for
a short moment so that any
dust in the suction hose is
conveyed to the filter bag.
auto
auto
1)
Optional accessories / Option depending on model
To Next Page
Loading...
Need help?
General
