x
I4-1
OPERATOR’S MANUAL FOR INFANT INCUBATOR EDITION/REVISION B/0
6.3 Function description…………………………………………………………………………………6-2
6.4 Connection of oxygen input connector……………………………………………………………6-2
6.5 Operation and calibration procedures……………………………………………………………6-3
6.6 Using of oxygen supply system……………………………………………………………………6-4
6.7 Maintenance…………………………………………………………………………………………6-5
7. HUMIDITY CONTROL SYSTEM……………………………………………………………………7-1
7.1 General………………………………………………………………………………………………7-1
7.2 Function description…………………………………………………………………………………7-1
7.3 Operation and calibration procedures…………………………………………………………7-1
7.4 Using of humidity control system…………………………………………………………………7-2
7.5 Maintenance…………………………………………………………………………………………7-3
8. WEIGHING SYSTEM…………………………………………………………………………………8-1
8.1 General………………………………………………………………………………………………8-1
8.2 Installation……………………………………………………………………………………………8-1
8.3 Function description…………………………………………………………………………………8-2
8.4 Operation and calibration procedures……………………………………………………………8-2
8.5 Operation of weighing system……………………………………………………………………8-2
8.6 Maintenance…………………………………………………………………………………………8-3
NOTE: The product composition maybe different from this manual, but it does not affect
product function. Please understand.
To Next Page
