1-2
I4-1
OPERATOR’S MANUAL FOR INFANT INCUBATOR
EDITION/REVISION B/0
DESCRIPTION OF PART EXPLANATION
I.V. pole
A kind of bearing part, which is used for hanging the infusion
bottle.
Max. Load: 2Kg
Controller
The core part with two kinds of temperature control modes: air
mode, baby mode, moreover, it also have the function of weighing,
humidity control and oxygen concentration controling system
which are used for autocontrol the heat output and the huminidy
and oxygen concentration in the incubator. The detail operation to
temperature please refer to the section 4, to oxygen concentration
please refer to the section 6, to huminidy please refer to the
section 7, to weighing please refers to the section 8.
Shelf
A kind of bearing part, which is used for putting some small
objects.
Max. Load: 3.5Kg
Baby compartment
It is used for place the infant inside, including the Acrylic hood,
bassinet, and so on. The bassinet can be tilted at the request of
clinical needs. The baby scale is optional part, and the Max. Load
of bassinet is 10 Kg.
Size of mattress: 630mm × 355mm
Base
An important part of Infant Incubator, and it is mainly composed of
the Aluminium tank, humidity chamber, air filter, and so on.
Mobile Cabinet
A part which can support the main body of Infant Incubator. We
have two kinds of cabinet: fixed type and vertical height
adjustment type. Usually we equip the former one, and the second
one is optional part.
Neonate bilirubin
phototherapy
equipment
It is intended for treating the bilirubin of patient.
This part is mounted on top of Infant Incubator, and its light source
has two kinds: fluorescent lamp and LED lamp, the user can
choose this.
for the Neonate Bilirubin Phototherapy Equipment with fluorescent
lamp, please refer to the user’s manual XHZ-90, while for the
Neonate Bilirubin Phototherapy Equipment with LED lamp, please
refer to the user’s manual XHZ-90L.
NOTE: Size of Infant Incubator:
W650 × H1560 × D1440mm
(for Infant Incubator with fixed cabinet);
W650 × H1500 × D1440mm ~ W650 × H1640 × D1440mm
(for Infant Incubator with vertical height adjustment cabinet).
Distance from the bassinet to the floor:
980mm (for Infant Incubator with fixed cabinet);
950mm ~ 1090mm (for Infant Incubator with vertical height adjustment cabinet).
Weight of Infant Incubator with fixed cabinet: 116Kg
Weight of Infant Incubator with vertical height adjustment cabinet: 126Kg
To Next Page
