14 / 76 ♦ BKI16ATEX0018X ♦ htk4014a0600p_03
3.1 ACCESSORIES
• Warranty Card • EView2 software CD
• Installation and Programming Manual • 2 pcs M20x1.5 cable gland
• Declaration of Conformity • SAP-300 display module (option)
3.2 SAFETY REGULATIONS FOR THE EX APPROVED UNITS
The level transmitter must be operated in intrinsically safe circuit only.
The metal enclosure of the unit must be connected to the EP circuit.
3.3 MAINTENANCE AND REPAIR
MicroTREK does not require maintenance on a regular basis. In some very rare instances, however, the probe may need a cleaning from deposited material.
This must be carried out gently, without damaging the probe.
Repairs during or after the warranty period are carried out exclusively at the Manufacturers. The equipment sent back for repairs should be cleaned or neutralised
(disinfected) by the User.
To Next Page
Loading...
