BKI16ATEX0018X ♦ htk4014a0600p_03 ♦ 15 / 76
4. MECHANICAL INSTALLATION
4.1 HANDLING AND STORAGE
The device will weigh between approximately 3 kg or 7 lb and 12 kg or 25 lb.
Carry using both hands to lift the device carefully by the converter housing. If necessary, use lifting gear.
No attempt should be made to lift the instrument by its probe.
Caution: The probe is a critical gauge component. Do not damage - Handle with care!
Avoiding blows - avoid hard blows, jolts, impacts, etc.
Caution: fragile electronics
To Next Page
Loading...
