2 / 76 ♦ BKI16ATEX0018X ♦ htk4014a0600p_03
GUIDED MICROWAVE LEVEL MEASUREMENT
the factory set maximum measuring
distance of the instrument (Xm)
max. measuring range of the instrument
max. programmed value of the
measuring distance of the appli cation
factory set value of the
min. measuring
distance (dead zone) Xm
programmed
measuring range
of the appli cations
LEV= (H - DIST)
VOL= ( DIST LEV)
level
volume calculated from
lo wer dead zone
(m easurement is not possi ble)
DIST= measured distance
upper dead zone set higher
than the pre-programmed
To Next Page
Loading...
