26 / 76 ♦ BKI16ATEX0018X ♦ htk4014a0600p_03
Electrostatic discharge (E.S.D.)
MicroTREK 2-wire non-Ex and Ex gauge electronics are shielded up to 4 kV against E.S.D.
Note: E.S.D. cannot be solved by MicroTREK 2-wire E.S.D. protection.
It is the customer’s responsibility to avoid E.S.D. by grounding the tank, product and probe installation.
DANGER OF INJURY
1
The probe may receive an electrostatic discharge during operation; earth
the probe by pushing it against tank wall with a suitably isolated tool just
before touching it to avoid receiving a shock.
2 Earth the entry pipe and product.
To Next Page
Loading...
