Nobles Marksman 412 - CLEANING WITH ACCESSORY TOOLS; DRAINING TANKS

OPERATION
Marksmant 412 (01–01)
7
CLEANING WITH ACCESSORY TOOLS
1. Connect accessory tool hoses to solution hose
coupler and vacuum hose port located at front of
machine (Figure 8).
FIG. 8
2. Turn main power switch on (Figure 9).
FIG. 9
3. Operate accessory tools as normal (Figure 10).
NOTE: When cleaning upholstery, always check
cleaning instructions sewn in furniture by
manufacturer.
FIG. 10
4. After cleaning, relieve water pressure from tool
before disconnecting hose. Squeeze trigger for
five seconds after turning main power switch off.
DRAINING TANKS
FOR SAFETY: When servicing machine, unplug
cord from wall outlet.
DRAINING RECOVERY TANK
1. Turn machine off and unplug power cord.
2. Hinge open cover, lift recovery tank out and empty
(Figure 11).
FIG. 11
NOTE: Make sure to rinse out recovery tank before
refilling solution tank.
DRAINING SOLUTION TANK
1. Pull solution tank drain hose off of hose barb at
rear of machine and empty remaining solution
(Figure 12).
FIG. 12
2. Replace drain hose.