Call functions
Copyright © 2004 Nokia. All rights reserved 17
6. To have a private conversation with one of
the participants:
Press Options and select Private. Scroll to
the desired participant and press OK. Once
you have finished the private
conversation, re-establish the conference
call, as described in step 4.
7. To end the conference call, press .
■ Answering or rejecting an
incoming call
Press to answer the incoming call and
press to end the call.
Press to reject the incoming call.
If you press Silence, only the ringing tone is
muted. Then either answer or reject the call.
Tip: If the Divert if busy function is
activated to divert the calls, for
example to your voice mailbox,
rejecting an incoming call will also
divert the call. See ”Call divert” on
page 31.
Call waiting
You can answer an incoming call while you
have a call in progress if you have activated
the function Call waiting service, see ”Call
waiting service” on page 32.
During a call, press to answer the
waiting call. The first call is put on hold. Press
to end the active call.
■ Options during a call
Press Options during a call for some of the
following network service options (if they are
available from your service provider and
operator for the current call):
Mute or Unmute, End call, End all calls, Phone
book, Menu and Hold or Unhold, New call,
Conference, Private, Answer and Reject.
Send DTMF is used to send DTMF tone strings,
for example, passwords or bank account
numbers. Key in the DTMF string or search for
it in the phone book and press OK. Note that
you can key in the wait character w and the
pause character p by repeatedly pressing
.
Swap is used to switch between the active
call and the call on hold, Transfer to connect a
call on hold to an active call, and disconnect
yourself from the calls, and Record to start
the voice recording.
To Next Page
Loading...
