Menu functions
32 Copyright © 2004 Nokia. All rights reserved
Automatic redial
Press Menu, select Settings, Call settings and
Automatic redial. Select On and your phone
will make a maximum of ten attempts to
connect the call after an unsuccessful call
attempt.
Speed dialling
Press Menu, select Settings, Call settings and
Speed dialling. Select On and the names and
phone numbers assigned to the speed dialling
keys, from to , can be dialled by
pressing and holding the corresponding
number key.
Call waiting service
Press Menu, select Settings, Call settings and
Call waiting service. Select Activate and the
network will notify you of an incoming call
while you have a call in progress (network
service). See ”Call waiting” on page 17.
Summary after call
Press Menu, select Settings, Call settings and
Summary after call. Select On and the phone
will briefly display the duration and cost
(network service) of the last call.
My number sending
Press Menu, select Settings, Call settings and
My number sending. Select On and your
phone number will be displayed to the person
you are calling (network service). Select
Preset to reset the phone to the setting, On or
Off, that you have agreed upon with your
service provider.
Line for outgoing calls
Line for outgoing calls is a network service to
select the phone line (that is, subscriber
number) 1 or 2 for making calls.
Press Menu, select Settings, Call settings and
Line for outgoing calls. If you select Line 2 and
have not subscribed to this network service,
you will not be able to make calls. However,
calls on both lines can be answered regardless
of the selected line.
If supported by your SIM card, you can
prevent the line selection by selecting the
option Lock.
For more information on availability, contact
your network operator or service provider.
Tip: In standby mode, you can switch
from one line to the other by pressing
and holding .
Phone settings
Language
Press Menu, select Settings, Phone settings
and Language. Select the language for the
display texts. If Automatic is selected, the
phone selects the language according to the
information on the SIM card.
Cell info display
Press Menu, select Settings, Phone settings
and Cell info display. Select On to set the
phone to indicate when it is used in a cellular
network based on Micro Cellular Network
(MCN) technology.
If the GPRS connection is set Always online,
the info messages may not be received. In
that case, set the GPRS connection to When
needed, see ”Setting up the phone for a WAP
service” on page 43.
Welcome note
Press Menu, select Settings, Phone settings
and Welcome note. Key in the note you would
like to be shown briefly when the phone is
switched on. To save the note, press Options,
and select Save.
Network selection
The cellular network to which your phone is
connected can be selected either manually or
automatically.
To Next Page
Loading...
