General information
8 Copyright © 2004 Nokia. All rights reserved
General information
■ Stickers in the sales package
The stickers contain important information
for service and customer support purposes.
Attach the sticker τo Your details page of
this Owner’s guide.
■ Access codes
• Security code (5 digits): The security code
protects your phone against unauthorised
use, and is supplied with the phone. The
preset code is 12345. Change the code in
the Settings menu, see ”Security settings”
on page 34. Keep the new code secret and
in a safe place separate from your phone.
Set the phone to request the code, see
”Security settings” on page 34.
• PIN code (4 to 8 digits): The PIN (Personal
Identification Number) code protects your
SIM card against unauthorised use. The
PIN code is usually supplied with the SIM
card.
Set the phone to request the PIN code
each time the phone is switched on, see
”Security settings” on page 34.
• PIN2 code (4 to 8 digits): The PIN2 code
may be supplied with the SIM card and is
required to access some functions, such as
charging unit counters.
• PUK and PUK2 codes (8 digits): The PUK
(Personal Unblocking Key) code is required
to change a blocked PIN code. The PUK2
code is required to change a blocked PIN2
code.
If the codes are not supplied with the SIM
card, contact your local service provider
for the codes.
• Barring password: The barring password is
needed when using the Call barring
service, see ”Security settings” on page 34.
The password is obtained from your
service provider.
• Wallet code (4-10 digits): The wallet
code is needed to access the wallet
services. For further information, see
“Wallet” on page 40.
• Module PIN: The Module PIN is required
to access the information in the Security
module. The module PIN is supplied with
the SIM card if the SIM card has a security
module in it.
• Signing PIN: The Signing PIN is needed for
the digital signature. The signing PIN is
supplied with the SIM card if the SIM card
has a security module in it.
To Next Page
Loading...
