Menu functions
26 Copyright © 2004 Nokia. All rights reserved
7. Menu functions
■ Messages
(Menu 1)
You can read, write and send text and picture
messages or save your messages. All the
messages in your phone’s message memory
are organised in folders.
Before you can send any text or picture
messages, you need to save your message
centre number, see ”Message settings” on
page 29.
Writing and sending messages
You can write and edit text messages of up to
160 characters.
1. Press Menu, and select Messages and
Write message
2. Key in a message. See ”Writing text” on
page 18.
See also ”Inserting a text template in a
message” on page 27 and ”Inserting a
picture template in a message” on page
27.
3. To send the message, press Options, and
select Send.
4. Enter the recipient’s phone number and
press OK to send the message, or search
for the phone number in the phone book.
Press OK to send the message.
Note: When sending messages via
the SMS network service, your phone
may display the words "Message
Sent". This is an indication that the
message has been sent by your
phone to the message centre number
programmed into your phone. This is
not an indication that the message
has been received at the intended
destination. For more details about
SMS services, check with your
service provider.
Options for sending a message
After you have written a message, press
Options, and select Sending options.
• To send a message to several recipients,
select Send to many. When you have sent
the message to everyone you want to send
it to, press Done.
• To send a message using a message profile,
select Sending profile and then the
message profile you want to use.
For example, if you select a profile you
have defined as an e-mail transmission,
key in or search the phone book for the
recipient’s e-mail address and press OK.
Key in the e-mail service number, select
Accept to send the message.
To define a message profile, see ”Message
settings” on page 29.
• To forward a message to several recipients
or using a message profile, select Forw.
options and then select Send to many or
Sending profile, respectively.