Menu functions
Copyright © 2004 Nokia. All rights reserved 39
Bluetooth accessories one by one starting 
from the device found first. The phone shows 
the device found last on the bottom of the 
list. To end the inquiry, press Stop. 
Scroll to the device you want and press 
Select. When the connection has been 
established, the device shows Connected to 
followed by the device’s name, and the 
indicator .
If devices have not been paired, the user is 
asked to enter the passcode of the desired 
device. See Pairing with Bluetooth Passcode 
above.
Note that if the device in the list moves out of 
range and you try to connect to it, an error 
note is shown. 
Note that you can have only one active 
connection at a time. 
To view the currently active device, press 
Menu, select Bluetooth and View active 
device. From here, you can also close the 
connection to the device.
To view the list of paired devices, press Menu, 
select Bluetooth and View paired devices. 
The oldest pairing is on the top of the list. 
When you press Options under View paired 
devices, some of the following options may 
be available, depending on the status of the 
device or connection: Assign short name, to 
give a name (visible to you only) to the paired 
device, Delete pairing to remove the selected 
device from the list, Request conn. 
authorisation to define whether the 
connection from the paired device is 
established automatically (No) or if the phone 
asks permission before connecting (Yes). 
Bluetooth settings
The settings are for changing the phone´s 
own Bluetooth related settings. Press Menu, 
select Bluetooth and Bluetooth settings. You 
have the following options: 
My phone's visibility, to change the way the 
phone is visible to other Bluetooth devices. 
The options are as follows: 
• Shown to all, which is the default mode 
• Hidden to make the device non-
discoverable, responding only to devices 
that it has been paired with.
• My phone’s name to change your phone’s 
Bluetooth device name, which is shown to 
others. 
■ Extras (Menu 11)
Note: The phone must be switched 
on to use this function. Do not 
switch on the phone when the use of 
a wireless phone is prohibited or 
when it may cause interference or 
danger.
Voice recorder
You can record pieces of speech, sound or an 
active call for three minutes. For example, 
this is useful when recording a name and 
phone number for writing them down later.
Note: Obey all local laws governing 
recording of calls. Do not use this 
feature illegally.
Recording
1. Press Menu, select Extras and Voice 
Recorder.
2. To start the recording, select Record. To 
start the recording during a call, press 
Options, and select Voice Record.
When recording, hold the phone in the 
normal position near to your ear.
3. To end the recording, press Stop.
4. Key in a new name for the recording and 
press OK to save it.