Data and fax communication
Copyright © 2004 Nokia. All rights reserved 51
Using data communication
applications
• Activate the IR connection (Menu 9) or
Bluetooth connection (Menu 10) of your
phone, or connect to the other device via
the cable.
• If you are using the IR connection, make
sure that the infrared port of the phone
faces the infrared port of the PC.
• Start using the data communications
application on the PC.
For information on the use of the
application, refer to the documentation
for the application.
Note that making or answering phone calls
during a PC connection is not recommended
as it might disrupt the operation.
For better performance during data calls,
place the phone on a stationary surface with
the keypad facing downward. Do not move
the phone by holding it in your hand during a
data call.
To Next Page
Loading...
