Nokia 6310 - Setting up the Phone for a WAP Service

Menu functions
Copyright © 2004 Nokia. All rights reserved 43
2. Make a connection to the given WAP
service. See ”Making a connection to a
WAP service” on page 44.
3. Start browsing the pages of the WAP
service. See ”Browsing the pages of a WAP
service” on page 45.
4. Once you are done with browsing, end the
connection to the WAP service. See
”Ending a WAP connection” on page 46.
Setting up the phone for a WAP
service
You may receive the service settings as a text
message from the network operator or service
provider that offers the WAP service that you
want to use. For more information, contact
your network operator or service provider, or
visit Club Nokia’s Web site
(www.club.nokia.com).
You can also key in the settings manually. For
appropriate settings, contact your network
operator or service provider. The WAP settings
may be available, for example, on the Web
site of the network operator or service
provider.
Saving the service settings received as
a text message
When you receive the service settings as a
text message, Service settings received is
displayed.
• To save and activate the received settings,
press Options and select Save.
If no settings are saved in Active service
settings, the settings are saved under the
first free connection set and activated.
• To discard the received settings, press
Options and select Discard.
• To view the received settings first, press
Options and select View. To save the
settings, press Save.
Keying in the service settings manually
1. Press Menu, select Services, and Settings.
2. Select Active service settings.
You need to activate the set where you
want to save the service settings. A set is a
collection of settings needed for making a
connection to a WAP service.
3. Scroll to the set you would like to activate
and press Activate.
4. Select Edit active service settings.
5. Select each of the service settings one by
one and key in all the required settings.
• Settings name - Key in the new name
for the settings set and press OK.
• Homepage - Key in the homepage
address of the WAP service that you
want to use, press for a period,
and press OK.
• Session mode - Select Permanent or
Temporary.
• Connection security - Select On or Off.
When the connection security is On,
the phone tries to use a secure
connection with the WAP service. If a
secure connection is not available, the
connection will not be made. If you
wish to connect anyway, with a non-
secure connection, you must set the
connection security to Off.
• Data bearer - Select GSM data or
GPRS. For pricing, connection speed
and other information, contact your
network operator or service provider.
The following options depend on the
selected data bearer:
When GSM data is the selected data
bearer:
• Dial-up number - Key in the phone
number and press OK.