7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Boot Options
Edition: 01 3HE 16132 AAAB TQZZA 187
• DNS Configuration Commands
4.12.2.1.1 File Management Commands
bof
Syntax bof
Context <ROOT>
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the boot options file (BOF) for the specified local storage device.
A BOF file specifies where the system searches for runtime images, configuration files, and
other operational parameters during system initialization.
BOF parameters can be modified, and changes can be saved to a specified compact flash.
The BOF must be located in the root directory of either an internal or external compact flash
local to the system and have the mandatory filename of bof.cfg.
When modifications are made to in-memory parameters that are currently in use or operating,
the changes are effective immediately. For example, if the console speed is changed, the
change takes place immediately.
Only one entry of the BOF configuration command statement can be saved after the
statement has been found to be syntactically correct.
No default BOF exists.
save
Syntax save [cflash-id]
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command uses the boot option parameters currently in memory and writes them from
the BOF to the compact flash.
The BOF is located in the root directory of the internal compact flash drive local to the system
and has the mandatory filename bof.cfg.
Command usage:
To Next Page
Loading...
Need help?
General
