Boot Options
188
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
• bof save
This configuration saves the BOF to the flash drive.
• bof save cf1:
This configuration saves the BOF to cf1:\.
Default Saves must be explicitly executed. BOF is saved at the same location as the location of
boot.tim used for booting the system.
Parameters cflash-id — The compact flash ID where the bof.cfg is to be saved.
Values uf1: (7210 SAS-M)
cf1: | cf2: | uf1: (7210 SAS-T, 7210 SAS-Sx 1/10GE,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2: | cf2-A: | cf2-B: | uf1: | uf1-A: | uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1: | cf2: (7210 SAS-S 1/10GE)
Default cf1:
4.12.2.1.2 BOF Processing Control
wait
Syntax wait seconds
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures a pause, in seconds, at the start of the boot process that allows the
user to interrupt system initialization at the console.
When the user interrupts system initialization, the user is allowed to manually override the
parameters defined in the BOF.
Only one wait command can be defined in the BOF.
Default 3
Parameters seconds — Specifies the length of the pause at the start of the boot process, in seconds
Values 1 to 10
To Next Page
Loading...
Need help?
General
