Boot Options
206
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command enables speed and duplex auto-negotiation on the management Ethernet port
in the running configuration and the BOF.
The no form of this command disables the auto-negotiate feature on this port.
Default eth-mgmt-autoneg
eth-mgmt-disabled
Syntax [no] eth-mgmt-disabled
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command allows the user to enable or disable the out-of-band management Ethernet
port for use during boot up.
The no form of this command enables the port.
Default eth-mgmt-disabled
eth-mgmt-duplex
Syntax eth-mgmt-duplex {full | half}
Context bof
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command configures the duplex mode of the management Ethernet port when auto-
negotiation is disabled in the running configuration and the BOF.
This configuration command allows for the configuration of the duplex mode of the Ethernet
port. If the port is configured to auto-negotiate, this parameter will be ignored.
Default eth-mgmt-duplex full
Parameters full — Keyword to set the link to full duplex mode.
half — Keyword to set the link to half duplex mode.