Nokia 7210 SAS-M User Manual

System Management
446
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
The no form of this command removes the specified minute from the configuration.
Parameters minute-number — Specifies the minute to schedule a command.
Values 0 to 59 (maximum 60 minute-numbers)
all — Specifies all minutes.
month
Syntax month {month-number [..month-number] | month-name [..month-name] | all}
no month
Context config>system>cron>sched
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies the month when the event should be executed. Multiple months can
be specified. When multiple months are configured, each of them will cause the schedule to
trigger. If a month is configured without configuring the weekday, day-of-month, hour, and
minute commands, the event will not execute.
See the weekday, day-of-month, hour and minute commands for more information.
The no form of this command removes the specified month from the configuration.
Parameters month-number — Specifies a month by number.
Values 1 to 12 (maximum 12 month-numbers)
all — Specifies all months.
month-name — Specifies a month by name.
Values january, february, march, april, may, june, july, august, september,
october, november, december (maximum 12 month names)
type
Syntax type {schedule-type}
Context config>system>cron>sched
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies how the system should interpret the commands contained within the
schedule node.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English