System Management
490
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
source-address
Syntax source-address ip-address
no source-address
Context config>redundancy>multi-chassis>peer
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command specifies the source address used to communicate with the multi-chassis
peer.
Parameters ip-address — Specifies the source address used to communicate with the multi-chassis
peer.
Values a.b.c.d (no multicast address)
sync
Syntax [no] sync
Context config>redundancy>multi-chassis>peer
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command enables the context to configure synchronization parameters.
igmp
Syntax [no] igmp
Context config>redundancy>multi-chassis>peer>sync
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document
Description This command specifies whether IGMP protocol information should be synchronized with the
multi-chassis peer.
Default no igmp
igmp-snooping
Syntax [no] igmp-snooping
To Next Page
Loading...
