System Management
510
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Context config>port>ethernet>lldp>dstmac
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies which management address to transmit.
The no form of this command reverts value to the default.
Default no tx-mgmt-address
Parameters system — Specifies to use the system IP address. If this parameter is specified, the
system address will only be transmitted once it has been configured.
tx-tlvs
Syntax tx-tlvs [port-desc] [sys-name] [sys-desc] [sys-cap]
no tx-tlvs
Context config>port>ethernet>lldp>dstmac
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command specifies which LLDP TLVs to transmit.
The no form of this command reverts to the default.
Default no tx-tlvs
Parameters port-desc — Specifies that the LLDP agent should transmit port description TLVs.
sys-name — Specifies that the LLDP agent should transmit system name TLVs.
sys-desc — Specifies that the LLDP agent should transmit system description TLVs.
sys-cap — Specifies that the LLDP agent should transmit system capabilities TLVs.
6.12.2.1.18 System Resource-Profile Commands
resource-profile
Syntax resource-profile policy-id [create]
no resource-profile policy-id
Context configure>system
To Next Page
Loading...
