7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 511
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Sx/S 1/10GE: standalone-VC
Description This command enables the context to configure resource profile parameters on the system.
Default 1
Parameters policy-id — Specifies a resource profile policy.
Values 1 to 16
create — Keyword to create a resource profile instance.
resource-profile
Syntax resource-profile
no resource-profile
Context configure>system
Supported
Platforms
7210 SAS-M, 7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE: standalone, and
7210 SAS-Sx 10/100GE
Description This command enables the context to configure resource profile parameters on the system.
enable-bgp3107-frr
Syntax enable-bgp-3107-frr
no enable-bgp3107-frr
Context config>system>resource-profile
Supported
Platforms
7210 SAS-M, 7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/
100GE
Description This command enables the allocation of MPLS FIB and protection group resources required
for enabling uniform fast reroute (FRR) for BGP RFC3107 LU routes resolved using RSVP-
TE LSPs. This is a per-node configuration and enabling the command affects all BGP LU
routes.
The no form of this command disables the use of uniform FRR for BGP LU routes.
Caution: If the command is enabled, the amount of resources required is twice the amount
required without uniform FRR, and the number of BGP LU routes that can be
accommodated in the MPLS FIB is therefore halved if uniform FRR is enabled. Ensure that
sufficient MPLS resources are available to accommodate all required BGP LU routes before
using this command.
To Next Page
Loading...
Need help?
General
