7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 547
down-mep
Syntax down-mep num-resources
no down-mep
Context configure>system>resource-profile>ingress-internal-tcam>eth-cfm
Supported
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, and
7210 SAS-Sx 10/100GE
Description This command enables the user to allocate more resources and increase the number of CFM/
Y.1731 Down MEPs. By default, the system allocates a single slice for use with Down MEP.
Resources from this pool are allocated towards the following:
• down MEP on SDP binding
• ingress MIPs on SAPs and SDP Bindings
Table 58 Number of Resources Available for ETH-CFM
Platforms Min value
(per node)
Max value
(per node)
Default
7210 SAS-M (per node) 0 1 0
7210 SAS-T Access-Uplink mode (per node) 0 1 0
7210 SAS-T Network mode (per node) 0 1 0
7210 SAS-R6 (per IMMv1) 1 3 1
7210 SAS-R6 and 7210 SAS-R12 (per
IMMv2)
131
7210 SAS-R6 and 7210 SAS-R12 (per IMM-
c)
131
7210 SAS-Mxp (per node) 1 3 1
7210 SAS-Sx 1/10GE (per node)
(standalone)
131
7210 SAS-Sx 1/10GE (standalone-VC) 2 4 2
7210 SAS-S 1/10GE (per node)
(standalone)
131
7210 SAS-S 1/10GE (standalone-VC) 2 4 2
7210 SAS-Sx 10/100GE (per node) 1 3 1