Nokia 7210 SAS-M User Manual

System Management
570
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
enable-bgp3107-frr
Syntax enable-bgp-3107-frr
no enable-bgp3107-frr
Context config>system>global-res-profile
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Sx/S 1/10GE (standalone-VC)
Description This command enables the allocation of MPLS FIB and protection group resources required
for enabling uniform FRR for BGP RFC3107 LU routes resolved using RSVP-TE LSPs. This
is a per-node configuration and enabling the command affects all BGP LU routes.
The no form of this command disables the use of uniform FRR for BGP LU routes.
Default no enable-bgp3107-frr
enable-ldporsvp-frr
Syntax enable-ldporsvp-frr
no enable-ldporsvp-frr
Context config>system>global-res-profile
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Sx/S 1/10GE (standalone-VC)
Description This command enables the allocation of MPLS FIB and protection group resources required
for enabling uniform FRR for LDP-over-RSVP LSPs (LDP FECs resolved using RSVP-TE
LSPs). This is a per-node configuration and enabling the command affects all LDP-over-
RSVP LSPs.
Caution: If the command is enabled, the amount of resources required is twice the amount
required without uniform FRR, and the number of BGP LU routes that can be
accommodated in the MPLS FIB is therefore halved if uniform FRR is enabled. Ensure that
sufficient MPLS resources are available to accommodate all required BGP LU routes before
using this command.
Caution: If the command is enabled, the amount of resources required is twice the amount
required without uniform FRR, and the number of LDP-over-RSVP LSPs that can be
accommodated in the MPLS FIB is therefore halved if uniform FRR is enabled. Ensure that
sufficient MPLS resources are available to accommodate all required LDP-over-RSVP
LSPs before using this command.

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English