System Management
612
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
ptp
Syntax ptp
Context show>system
Supported
Platforms
7210 SAS-M (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12,
7210 SAS-Sx 10/100GE, 7210 SAS-T (network and access-uplink)
Description This command displays the parameters for IEEE 1588-2008/ Precision Time Protocol (PTP)
information.
Output The following output is an example of PTP information, and Table 75 describes the output
fields.
Sample Output
A:7210SAS>show>system# ptp
==============================================================================
IEEE 1588/PTP Clock Information
===============================================================================
-------------------------------------------------------------------------------
Local Clock
-------------------------------------------------------------------------------
Clock Type : boundary PTP Profile : IEEE 1588-2008
Domain : 0 Network Type : sdh
Admin State : up Oper State : up
Announce Interval : 1 pkt/2 s Announce Rx Timeout: 3 intervals
Clock Id : 846991fffea8c8f5 Clock Class : 248 (default)
Clock Accuracy : unknown Clock Variance : ffff (not computed)
Clock Priority1 : 128 Clock Priority2 : 128
Decommissioned
Ports
The list of ports which have been decommissioned by the
user
Services cannot be configured on these ports
MBS pool Displays the value configured for mbs-pool
Available only on 7210 SAS-T
BiDir MIP Egress Displays the amount of resources allocated towards Bi-dir
MIP functionality in the egress-internal-tcam resource pool
Available only on 7210 SAS-R6 and 7210 SAS-R12
Port Scheduler
Policy
disabled — Indicates that SAP-based egress queues for
access SAPs is configured per node
enabled — Indicates that port-based queues are configured
for access SAPs
Table 74 Output Fields: System Resource Profile (Continued)
Label Description
To Next Page
Loading...
