Security
172
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
keychain
Syntax keychain [keychain] [detail]
Context show>system>security
Description This command displays information about keychains.
If a keychain name is not specified, all keychains are displayed.
Parameters keychain — displays information about the specified keychain
detail — displays detailed keychain information
Output The following output is an example of keychain information, and Table 14 describes the
fields.
Output Example
===============================================================================
Key chain:ospf-md5
===============================================================================
Description : MD5 keychain for OSPF interfaces
TCP-Option number send : 254 Admin state : Up
TCP-Option number receive : 254 Oper state : Up
Used by : None
Expired : No
===============================================================================
*A:ALU-35#
A:ALU-35# show system security keychain ospf-md5 detail
===============================================================================
Key entries for key chain: ospf-md5
===============================================================================
Id : 0 Direction : send-receive
Algorithm : message-digest Option : none
Admin State : Up RX Valid : No
TX Active : No Tolerance : 300
Begin Time : 2016/06/01 01:01:00 Begin Time (UTC) : 2016/06/01 01:01:00
End Time : 2016/09/01 01:01:00 End Time (UTC) : 2016/09/01 01:01:00
===============================================================================
Id : 1 Direction : send-receive
Algorithm : message-digest Option : none
Admin State : Up RX Valid : Yes
TX Active : Yes Tolerance : 600
Next Hop If match action is forward, indicates destination of the matched
packet
Forwarded pkts Indicates number of matched forwarded packets
Table 13 Show CPM Filter Output Fields (Continued)
Label Description