System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 181
Preserve Key : Disabled
SSH Protocol Version 1 : Disabled
SSH Protocol Version 2 : Enabled
DSA Host Key Fingerprint : bd:fe:f5:fc:15:9d:86:65:f5:63:02:d5:55:16:d1:50
RSA Host Key Fingerprint : 00:d6:b3:83:41:2f:50:ea:63:ef:5d:71:30:ef:93:ad
-------------------------------------------------------------------------------
Connection Username
Version Cipher ServerName Status
-------------------------------------------------------------------------------
3301::xxxx:xxxx admin
2 aes256-ctr cli connected
-------------------------------------------------------------------------------
Number of SSH sessions : 1
===============================================================================
Table 19 Show SSH Output Fields
Label Description
Administrative State The administrative state of the SSH server: enabled or
disabled
Operational State The operational state of the SSH server: up or down
Preserve Key Enabled: preserve-key is enabled
Disabled: preserve-key is disabled
SSH Protocol Version 1 Enabled: SSH1 is enabled
Disabled: SSH1 is disabled
SSH Protocol Version 2 Enabled: SSH2 is enabled
Disabled: SSH2 is disabled
DSA Host Key Fingerprint
RSA Host Key Fingerprint
The key fingerprint is the digital signal algorithm (DSA) or
Rivest, Shamir, and Adleman (RSA) host server’s identity.
Clients trying to connect to the server verify the server’s
fingerprint. If the server fingerprint is not known, the client
may not continue with the SSH session since the server
might be spoofed.
Connection The IP address of the connected routers (remote client)
Username The name of the user
Version The cipher SSH protocol version
Cipher The ciphers configured for the SSH server
ServerName The type of SSH application (CLI, SCP, or SFTP)
Status The status of the connection
Number of SSH sessions The total number of SSH sessions
To Next Page
Loading...
