Security
180
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
ssh
Syntax ssh
Context show>system>security
Description This command displays all the SSH sessions as well as the SSH status and fingerprint. The
type of SSH application (CLI, SCP, or SFTP) is indicated for each SSH connection.
Output The following outputs are examples of SSH information (IPv4 and IPv6) for an SSH sever,
and Table 19 describes the fields.
Output Example (IPv4)
ALU-7# show system security ssh
SSH is enabled
SSH preserve key: Enabled
SSH protocol version 1: Enabled
RSA host key finger print:c6:a9:57:cb:ee:ec:df:33:1a:cd:d2:ef:3f:b5:46:34
SSH protocol version 2: Enabled
DSA host key fingerprint:c0:be:4a:da:55:87:e0:92:da:33:b8:55:fb:42:71:58
RSA host key fingerprint:79:28:68:61:d8:8b:c0:f0:5c:f5:bc:0b:fa:02:24:d8
========================================================================
Connection Username Version ServerName Status
========================================================================
192.168.xxx.xxx admin 1-2 cli connected
-------------------------------------------------------
Number of SSH sessions : 1
===============================================================================
Output Example (IPv6)
*A:7705:Dut-C> # show system security ssh
===============================================================================
SSH Server
===============================================================================
Administrative State : Enabled
Operational State : Up
Table 18 Show Source Address Output Fields
Label Description
Application The source-address application
IP address: Interface
Name
The source address IP address or interface name
Oper status Up: The source address is operationally up
Down: The source address is operationally down
To Next Page
Loading...
