Event and Accounting Logs
294
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
5.12.2.1.1 Generic Commands
description
Syntax description description-string
no description
Context config>log>filter
config>log>filter>entry
config>log>log-id
config>log>accounting-policy
config>log>file-id
config>log>syslog
config>log>snmp-trap-group
Description This command creates a text description stored in the configuration file for a configuration
context.
The command associates a text string with a configuration context to help identify the content
in the configuration file.
The no form of the command removes the string from the configuration.
Default No text description is associated with this configuration.
Parameters string — The description can contain a string of up to 80 characters composed of
printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
shutdown
Syntax [no] shutdown
Context config>log>log-id
config>log>accounting-policy
Description This command administratively disables an entity. When disabled, an entity does not change,
reset, or remove any configuration settings or statistics.
The operational state of the entity is disabled as well as the operational state of any entities
contained within. Many objects must be shut down before they can be deleted.
The no form of this command administratively enables an entity.
Default no shutdown
To Next Page
Loading...
