Event and Accounting Logs
342
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
log-id
Syntax log-id [log-id] [severity severity-level] [application application] [sequence from-seq [to-
seq]] [count count] [router router-instance [expression]] [subject subject [regexp]]
[ascending | descending]
Context show>log
Description This command displays an event log summary with settings and statistics or the contents of
a specific log file, SNMP log, or memory log.
If the command is specified with no command line options, a summary of the defined system
logs is displayed. The summary includes log settings and statistics.
If the log ID of a memory, SNMP, or file event log is specified, the command displays the
contents of the log. Additional command line options control what and how the contents are
displayed.
Contents of logs with console, session or syslog destinations cannot be displayed. The actual
events can only be viewed on the receiving syslog or console device.
Parameters log-id — displays the contents of the specified log file or memory log ID. The log ID must
have a destination of an SNMP or log file or a memory log for this parameter to be
used.
Values 1 to 100
Default displays the event log summary
severity-level — displays only events with the specified and higher severity
Values cleared, indeterminate, critical, major, minor, and warning
Default all severity levels
application — displays only events generated by the specified application
Values aps, atm, bgp, chassis, debug, dhcp, dhcps, efm_oam, eth_cfm,
filter, firewall, igmp, igmp_snooping, ip, ipsec, isis, lag, ldp, lldp,
logger, mcpath, mc_redundancy, mirror, mld, mld_snooping, mpls,
mwmgr, ntp, oam, ospf, pim, pim_snooping, port, ppp, ptp, radius,
rip, rip_ng, route_policy, rsvp, security, snmp, stp, svcmgr, system,
tss, user, vrrp, vrtr
Default all applications
from-seq [to-seq] — displays the log entry numbers from a particular entry sequence
number (from-seq) to another sequence number (to-seq). The to-seq value must be
larger than the from-seq value.
To Next Page
Loading...
