Nokia 7705 - Page 98

Security
98
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
Description This command configures a source IPv4 address range to be used as a management access
filter match criterion.
To match on the source IP address, specify the address and the associated mask (for
example, 10.1.0.0/16). The conventional notation of 10.1.0.0 255.255.0.0 can also be used.
The no form of the command removes the source IP address match criterion.
Default n/a
Parameters ip-prefix — the IP prefix for the IP match criterion in dotted-decimal notation
mask — the subnet mask length expressed as a decimal integer
Values 0.0.0.0 to 255.255.255.255 (IP prefix), 1 to 32 (mask length)
netmask — the subnet mask in dotted-decimal notation
Values a.b.c.d (network bits all 1 and host bits all 0)
src-ip
Syntax src-ip ipv6-address/prefix-length
no src-ip
Context config>system>security>management-access-filter>ipv6-filter>entry
Description This command configures a source IPv6 address range to be used as an management
access filter match criterion.
To match on the source IP address, specify the address and prefix length; for example,
11::12/128.
The no form of the command removes the source IP address match criterion.
Default n/a
Parameters ipv6-address/prefix-length — the IPv6 address on the interface
Values ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 to FFFF]H
d: [0 to 255]D
prefix-length: 1 to 128
src-port
Syntax src-port {port-id | cpm | lag lag-id}
no src-port