System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 99
Context config>system>security>management-access-filter>ip-filter>entry
config>system>security>management-access-filter>ipv6-filter>entry
Description This command restricts ingress management traffic to either the CSM Ethernet port or any
other logical port (port or channel) on the device.
When the source interface is configured, only management traffic arriving on those ports
satisfy the match criteria.
The no form of the command reverts to the default value.
Default any interface
Parameters port-id — the port ID
Values
cpm — specifies that ingress management traffic is restricted to the CSM Ethernet port
lag-id — the LAG ID
Values 1 to 32
renum
Syntax renum old-entry-number new-entry-number
Context config>system>security>management-access-filter>ip-filter
config>system>security>management-access-filter>ipv6-filter
Description This command renumbers existing management access filter entries to resequence filter
entries.
The 7705 SAR exits on the first match found and executes the actions in accordance with the
accompanying action command. This may require some entries to be renumbered from most
to least explicit.
Parameters old-entry-number — the entry number of the existing entry
Values 1 to 9999
new-entry-number — the new entry number that will replace the old entry number
Values 1 to 9999
port-id slot/mda/port
bundle-id bundle-type-slot/mda.bundle-num
type ima, ppp
bundle-num 1 to 128
To Next Page
Loading...
