After Sales
Technical Documentation
RAE/RAK–1N
Service Software
Page 7– 69
Amendment 1 04/97
After the image is programmed, the updated memory area is
checksummed and the result is compared to the one given in the header
file. The memory area between 3FFFC00h – 3FFFFFFh is not included in
the area where the checksumming is done.
3.6.3 – Erase Flash
This menu provides means to erase one or more blocks of the PDA Flash
memory in parallel to all the targets.
User options are:
Start Physical Address default: 3A00000h Range: 3A00000h
3C00000h
3E00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3A00000h Range: 3A00000h
3C00000h
3E00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash erasing has been successful
3.6.4 – Lock Flash
This menu provides means to lock one or more blocks of the PDA Flash
memory in parallel to all targets.
User options are:
Start Physical Address default: 3C00000h Range: 3A00000h
3C00000h
3E00000h
Start Relative Address default: 000000h Range: 000000h – 1FFFFFh
End Physical Address default: 3E00000h Range: 3A00000h
3C00000h
3E00000h
End Relative Address default: 1FFFFFh Range: 000000h – 1FFFFFh
The output from the target shows the following:
whether the command was parsed successfully
whether the Flash locking has been successful
To Next Page
Loading...