EasyManua.ls Logo

Nokia 9000i - Humidity and Water Resistance; Maximum Ratings; Vibration and Free Fall; Operating Instructions

Nokia 9000i
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
After Sales
Technical Documentation
RAE/RAK–1N
Overview
Page 1– 19
Original, 08/96
Vibration and Free Fall
The transceiver meets the module phase error requirements which
equates to a total RMS vibration in the range 10 Hz to 150 Hz of 0.5 g.
The transceiver has been drop tested to withstand an 80cm drop onto a
solid floor.
Humidity and Water Resistance
Relative humidity range in normal operation conditions : 20 ... 75 %.
Relative humidity range allowed : 5 ... 95 %
The transceiver is not waterproof and care should be taken if used in
damp conditions.
Maximum Ratings
Table 11. Maximum Ratings
Pin / Conn Line Symbol Minimum Typical /
Nominal
Maxi-
mum
Unit / Notes
1 / Battery VBATT 5.0 7.2 9.0 V / Phone off in
min . extreme,
PDA on
1 / 3 / Char VCHAR 10.0 12.0 13.0 V (unloaded)
Operating Instructions
Operating instructions are given in the QUICK GUIDE in the Appendix of
this manual and the USER‘S GUIDE that comes with the product. The
transceiver is provided with a HELP system via both keypads (lid
open/closed). Also, ‘on line’ help will be available on the Internet via the
Nokia–club service.

Table of Contents

Other manuals for Nokia 9000i